| Seisukord: | Uus | Töötlemise tüüp | Sepistamine |
| Kohaldatavad tööstusharud: | Energeetika ja kaevandamine, maa-alune puurimine ja pinnapuurimine | Kasuta | Maagi kaevandamine, karjäär, kaevandamine, lõhkamine, ehitus, avatud puur jne. |
| Video väljaminev-ülevaatus | Tingimusel | Kvaliteet | 100% kvaliteedisarnasused maailma tipptasemel kaubamärgid |
| Masinatesti aruanne | Tingimusel | Eelised | kõrge kvaliteet ja tehasehinnad |
| Turunduse tüüp | Tavaline Toode | Boby tüüp | Tavaline tüüp või tagasitõmbetüüp |
| Brändi nimi | JCDRILL | Niit | R25, R28, R32, R3212 R35, R38, T38, T45, T51, ST58, GT60, GT68 |
| Tüüp | Keerme nupu bitt | Volframkarbiid | Sfääriline, ballistiline, kooniline, poolkerakujuline |
| Masina tüüp | Puurimistööriist | Fakti tüüp | Kukkumiskeskus, lame nägu, kumer, nõgus jne |
| Materjal | Süsinikteras |
Sissejuhatus
JCDRILLi keermestatud nupuotsakud pakuvad tööstuses juhtivat tugevust ja läbitungimisvõimet suurema tootlikkuse, suurepärase sirguse ja aukude puhta kvaliteedi tagamiseks ning pika elueaga kivipuuriterade maksimaalset puurimistõhusust, et säästa kütusekulu.R32-76 mm keermestatud puuriterad on spetsiaalselt loodud kõvade kivide moodustamiseks.
Kasutame T6 volframkarbiidi, millel on hea kulumiskindlus ja sitkus.
Seda tüüpi karbiidid on juba osutunud maailma parimateks ja konkureerinud nende suurte nimedega kogu maailmas juba pikka aega.
Vahepeal kasutame kuumsisestustehnoloogia jaoks sobivat kvaliteetset terast, mille abil puuritera korpus hoiab karbiidnuppe nii tihedalt, et vähendab nuppude ohtu.'aukudest välja kukkudes.
Kivimi abrasiivsuse paremaks vastupidamiseks on sfääriline kuju karbiidi jaoks hea valik, kui suur kiirus pole vajalik.
| R32 | ||||||||
| Triivimine ja tunnelitamine | ||||||||
| Puuriotsik | Bit Dia. | EI x Nupp x Dia. | Loputusauk | Kaal | ||||
| mm | tolli | Esiosa | Mõõtur | Nurk | Esiosa | Külg | (KG) | |
 | sfäärilised nupud | |||||||
| 41 | 1 5/8 | 2x9 | 4x9 | 35° | 1 | 1 | 0.6 | |
| 41 | 1 5/8 | 2x8 | 5x9 | 35° | 1 | 1 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x9 | 35° | 1 | 2 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x10 | 35° | 1 | 1 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 6x9 | 40° | 2 | 0.7 | ||
| 45 | 1 3/4 | 2x9 | 5x11 | 30° | 1 | 1 | 0.8 | |
| 45 | 1 3/4 | 2x9 | 6x10 | 35° | 2 | 0.8 | ||
| 45 | 1 3/4 | 3x8 | 6x10 | 30° | 3 | 0.8 | ||
| 48 | 1 7/8 | 2x9 | 5x11 | 35° | 1 | 1 | 0.9 | |
| 48 | 1 7/8 | 2x9 | 6x10 | 40° | 2 | 0.9 | ||
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 48 | 1 7/8 | 2x9 | 6x10 | 30° | 3 | 0.9 | ||
| 51 | 2 | 2x10 | 5x11 | 35° | 1 | 1 | 1.0 | |
| 51 | 2 | 2x10 | 6x10 | 40° | 2 | 1.0 | ||
| 51 | 2 | 3x9 | 6x10 | 35° | 3 | 1.0 | ||
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 3x10,1x10 | 6x11 | 35° | 3 | 1.6 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
| 76 | 3 | 4x11 | 8x11 | 40° | 2 | 2.6 | ||
 | Paraboolsed nupud | |||||||
| 41 | 1 5/8 | 2x8 | 5x9 | 40° | 1 | 1 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x9 | 40° | 1 | 2 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x10 | 40° | 2 | 0.7 | ||
| 43 | 1 2/3 | 2x9 | 6x9 | 40° | 3 | 1 | 0.7 | |
| 45 | 1 3/4 | 2x9 | 5x11 | 30° | 1 | 2 | 0.8 | |
| 45 | 1 3/4 | 2x9 | 6x10 | 40° | 2 | 2 | 0.8 | |
| 45 | 1 3/4 | 3x8 | 6x10 | 40° | 3 | 1 | 0.8 | |
| 48 | 1 7/8 | 2x9 | 5x11 | 35° | 1 | 1 | 0.9 | |
| 48 | 1 7/8 | 2x9 | 6x10 | 40° | 2 | 0.9 | ||
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 51 | 2 | 2x10 | 6x10 | 40° | 2 | 1 | ||
| 51 | 2 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 54 | 2 1/8 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
 | 41 | 1 5/8 | 16x10 | 1 | 4 | 0.7 | ||
| 43 | 1 2/3 | 16x10 | 1 | 4 | 0.8 | |||
| 45 | 1 3/4 | 16x10 | 1 | 4 | 0.9 | |||
| 48 | 1 7/8 | 16x10 | 1 | 4 | 0.9 | |||
| 51 | 2 | 16x10 | 1 | 4 | 1.2 | |||
| 57 | 2 1/4 | 16x10 | 1 | 4 | 1.3 | |||
| 64 | 2 1/2 | 18x13 | 1 | 4 | 1.5 | |||
| Puurirull | Pikkus | Dimaeter | Kaal | |||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 2400 | 7'10'' | 32 | 1 1/4 | 15.3 | |||
| 3090 | 10'11/2'' | 32 | 1 1/4 | 19.8 | ||||
| 3400 | 11'13/4'' | 32 | 1 1/4 | 21.7 | ||||
| 4000 | 13'13/8'' | 32 | 1 1/4 | 25.5 | ||||
| 4310 | 14'11/2'' | 32 | 1 1/4 | 27.5 | ||||
| 4920 | 16'11/2'' | 32 | 1 1/4 | 31.3 | ||||
| 5530 | 18'11/2'' | 32 | 1 1/4 | 35.2 | ||||
| 3090 | 10'11/2'' | 35 | 1 3/8 | 24 | ||||
| 3700 | 12'11/2'' | 35 | 1 3/8 | 28.7 | ||||
| 4000 | 13'13/8'' | 35 | 1 3/8 | 31.1 | ||||
| 4310 | 14'11/2'' | 35 | 1 3/8 | 33.4 | ||||
| 4920 | 16'11/2'' | 35 | 1 3/8 | 37.8 | ||||
| 5530 | 18'11/2'' | 35 | 1 3/8 | 42.9 | ||||
| 6100 | 20' | 35 | 1 3/8 | 47.3 | ||||
| 3700 | 12'11/2'' | 35 | 1 3/8 | 29 | ||||
| 4310 | 14'11/2'' | 35 | 1 3/8 | 34.1 | ||||
| 4920 | 16'11/2'' | 35 | 1 3/8 | 38.8 | ||||
| 5530 | 18'11/2'' | 35 | 1 3/8 | 43.6 | ||||
| 6400 | 21' | 35 | 1 3/8 | 50.3 | ||||
| Sidumine | Pikkus | Dimaeter | Niit | Kaal | ||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 170 | 6 3/4 | 55 | 2 5/32 | R38 | 1.8 | ||
| 190 | 7 1/2 | 55 | 2 5/32 | T38 | 2 | |||
| 150 | 6 1/8 | 45 | 1 3/4 | R25-R32 | 1.1 | |||
| 160 | 6 1/4 | 45 | 1 3/4 | R25-R32 | 1.2 | |||
| 160 | 6 1/4 | 45 | 1 3/4 | R28-R32 | 1.2 | |||
| 160 | 6 1/4 | 55 | 2 5/32 | R32-R38 | 1.8 | |||
| 170 | 6 3/4 | 55 | 2 5/32 | R32-R38 | 2 | |||
| 180 | 71/16 | 55 | 2 5/32 | R32-R38 | 2.2 | |||
| 210 | 8 1/4 | 55 | 2 5/32 | R32-R38 | 2.8 | |||
| 170 | 6 3/4 | 56 | 2 1/8 | R32-T38 | 2.1 | |||
| 180 | 71/16 | 56 | 2 1/8 | R32-T38 | 2.2 | |||
| 210 | 8 1/4 | 56 | 2 1/8 | R32-T38 | 2.8 | |||
| 190 | 7 1/2 | 63 | 2 33/64 | R32-T45 | 3.2 | |||
| Pingi puurimine | ||||||||
| Puuriotsik | Bit Dia. | EI x Nupp x Dia. | Loputusauk | Kaal | ||||
| mm | tolli | Esiosa | Mõõtur | Nurk | Esiosa | Külg | (KG) | |
 | sfäärilised nupud | |||||||
| 48 | 1 7/8 | 2x9 | 5x11 | 35° | 1 | 2 | 1 | |
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 51 | 1 | 2x10 | 5x11 | 35° | 1 | 2 | 1 | |
| 51 | 2 | 3x9 | 6x10 | 35° | 3 | 1 | ||
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 57 | 2 1/4 | 3x10 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 3x11 | 6x12 | 30° | 3 | 1.6 | ||
| 64 | 2 1/2 | 3x10,1x10 | 6x11 | 35° | 3 | 1.6 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
| 70 | 3 | 4x11 | 8x11 | 40° | 2 | 2.6 | ||
| 76 | 3 | 4x11,1x11 | 8x11 | 35° | 2 | 2.6 | ||
 | Paraboolsed nupud | |||||||
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 51 | 2 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 54 | 2 1/8 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 57 | 2 1/4 | 3x10 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
 | 45 | 1 3/4 | 16x10 | 1 | 4 | 0.9 | ||
| 48 | 1 7/8 | 16x10 | 1 | 4 | 0.9 | |||
| 51 | 2 | 16x10 | 1 | 4 | 1.2 | |||
| 57 | 2 1/4 | 16x10 | 1 | 4 | 1.3 | |||
| 64 | 2 1/2 | 16x10 | 1 | 4 | 1.5 | |||
| Puurirull | Pikkus | Dimaeter | Kaal | |||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 915 | 3' | 32 | 1 1/4 | 5.4 | |||
| 1000 | 3'33/8'' | 32 | 1 1/4 | 5.9 | ||||
| 1220 | 4' | 32 | 1 1/4 | 7.2 | ||||
| 1830 | 6' | 32 | 1 1/4 | 10.8 | ||||
| 2435 | 8' | 32 | 1 1/4 | 14.3 | ||||
| 3050 | 10' | 32 | 1 1/4 | 17.9 | ||||
| 3660 | 12' | 32 | 1 1/4 | 21.5 | ||||
 | 915 | 3' | 32 | 1 1/4 | 6.2 | |||
| 1000 | 4' | 32 | 1 1/4 | 8 | ||||
| 1220 | 5' | 32 | 1 1/4 | 9.8 | ||||
| 1830 | 6' | 32 | 1 1/4 | 11.6 | ||||
| 2435 | 8' | 32 | 1 1/4 | 15.1 | ||||
| 3050 | 10' | 32 | 1 1/4 | 18.7 | ||||
| 3660 | 12' | 32 | 1 1/4 | 22.3 | ||||
 | 3050 | 10' | 39 | 1 1/2 | 27 | |||
| 3660 | 12' | 39 | 1 1/2 | 32 | ||||
 | 1220 | 4' | 46 | 1 3/4 | 10 | |||
| 1525 | 5' | 46 | 1 3/4 | 12.5 | ||||
| 1830 | 6' | 46 | 1 3/4 | 14.2 | ||||
| 3050 | 10' | 46 | 1 3/4 | 25 | ||||
| Sidumine | Pikkus | Dimaeter | Kaal | |||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 150 | 6 1/8 | 44 | 1 3/4 | 1 | |||
| 160 | 6 1/4 | 44 | 1 3/4 | 1.1 | ||||
Pilt
| Minimaalne tellimuse kogus | Ei kehti |
| Hind | |
| Pakendi üksikasjad | Standardne eksporditarnepakett |
| Tarne aeg | 7 päeva |
| Maksetingimused | T/T |
| Pakkumise võime | Täpsema tellimuse alusel |
