| Seisukord: | Uus | Töötlemise tüüp | Sepistamine |
| Kohaldatavad tööstusharud: | Energeetika ja kaevandamine, maa-alune puurimine ja pinnapuurimine | Kasuta | Maagi kaevandamine, karjäär, kaevandamine, lõhkamine, ehitus, avatud puur jne. |
| Video väljaminev-ülevaatus | Tingimusel | Kvaliteet | 100% kvaliteedisarnasused maailma tipptasemel kaubamärgid |
| Masinatesti aruanne | Tingimusel | Eelised | kõrge kvaliteet ja tehasehinnad |
| Turunduse tüüp | Tavaline Toode | Boby tüüp | Tavaline tüüp või tagasitõmbetüüp |
| Brändi nimi | JCDRILL | Niit | R25, R28, R32, R3212 R35, R38, T38, T45, T51, ST58, GT60, GT68 |
| Tüüp | Keerme nupu bitt | Volframkarbiid | Sfääriline, ballistiline, kooniline, poolkerakujuline |
| Masina tüüp | Puurimistööriist | Fakti tüüp | Kukkumiskeskus, lame nägu, kumer, nõgus jne |
| Materjal | Süsinikteras |
Sissejuhatus
Isane/emane varras, isane/emane (M/F) Varda-kiirusvarras M/F puurterasest on alternatiiv ühendusmuhvidele, et lisada keermestatud ühenduse siseosa puurterase lahutamatu osana.M/F puurterasest on jäigemad ühendused ning seda on lihtsam lahti ühendada ja käsitseda.Kasutusiga kipub ka parem olema kui eraldi siduritega.
Pikendusvarda ja M/F terase protsesside puhul kasutatakse kiirete ja võimsate löökpuurimisnööri komponentide tugevdamiseks järgmisi kahte erinevat tüüpi kuumtöötlust, et maksimeerida nende jõudlust ja töökindlust. - Kannibaliseerimine on protsess, mida kasutatakse kogu varda pinna karastamiseks. seest ja väljast, et tugevdada ja pikendada ridva eluiga.- Kõrgsagedusinduktsioon on protsess, mille käigus karastatakse keerme eluea pikendamiseks ainult varda keermeotsad.
Eelised:
Võrreldes välismaiste kaubamärkidega on meie eelised järgmised:
• Meie tooted vastavad enam kui 95% originaaltoodetele
• Hind on konkurentsivõimeline kuulsate kaubamärkide ja parim kvaliteet väikese tehase suhtes
Rakendused:
• Allmaakaevandamine
• Tunnelite rajamine, kaevandamine
• Laialdaselt kasutatav pingitöödel ja pikkade aukude puurimisel
| R32 | ||||||||
| Triivimine ja tunnelitamine | ||||||||
| Puuriotsik | Bit Dia. | EI x Nupp x Dia. | Loputusauk | Kaal | ||||
| mm | tolli | Esiosa | Mõõtur | Nurk | Esiosa | Külg | (KG) | |
 | sfäärilised nupud | |||||||
| 41 | 1 5/8 | 2x9 | 4x9 | 35° | 1 | 1 | 0.6 | |
| 41 | 1 5/8 | 2x8 | 5x9 | 35° | 1 | 1 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x9 | 35° | 1 | 2 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x10 | 35° | 1 | 1 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 6x9 | 40° | 2 | 0.7 | ||
| 45 | 1 3/4 | 2x9 | 5x11 | 30° | 1 | 1 | 0.8 | |
| 45 | 1 3/4 | 2x9 | 6x10 | 35° | 2 | 0.8 | ||
| 45 | 1 3/4 | 3x8 | 6x10 | 30° | 3 | 0.8 | ||
| 48 | 1 7/8 | 2x9 | 5x11 | 35° | 1 | 1 | 0.9 | |
| 48 | 1 7/8 | 2x9 | 6x10 | 40° | 2 | 0.9 | ||
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 48 | 1 7/8 | 2x9 | 6x10 | 30° | 3 | 0.9 | ||
| 51 | 2 | 2x10 | 5x11 | 35° | 1 | 1 | 1.0 | |
| 51 | 2 | 2x10 | 6x10 | 40° | 2 | 1.0 | ||
| 51 | 2 | 3x9 | 6x10 | 35° | 3 | 1.0 | ||
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 3x10,1x10 | 6x11 | 35° | 3 | 1.6 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
| 76 | 3 | 4x11 | 8x11 | 40° | 2 | 2.6 | ||
 | Paraboolsed nupud | |||||||
| 41 | 1 5/8 | 2x8 | 5x9 | 40° | 1 | 1 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x9 | 40° | 1 | 2 | 0.7 | |
| 43 | 1 2/3 | 2x9 | 5x10 | 40° | 2 | 0.7 | ||
| 43 | 1 2/3 | 2x9 | 6x9 | 40° | 3 | 1 | 0.7 | |
| 45 | 1 3/4 | 2x9 | 5x11 | 30° | 1 | 2 | 0.8 | |
| 45 | 1 3/4 | 2x9 | 6x10 | 40° | 2 | 2 | 0.8 | |
| 45 | 1 3/4 | 3x8 | 6x10 | 40° | 3 | 1 | 0.8 | |
| 48 | 1 7/8 | 2x9 | 5x11 | 35° | 1 | 1 | 0.9 | |
| 48 | 1 7/8 | 2x9 | 6x10 | 40° | 2 | 0.9 | ||
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 51 | 2 | 2x10 | 6x10 | 40° | 2 | 1 | ||
| 51 | 2 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 54 | 2 1/8 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
 | 41 | 1 5/8 | 16x10 | 1 | 4 | 0.7 | ||
| 43 | 1 2/3 | 16x10 | 1 | 4 | 0.8 | |||
| 45 | 1 3/4 | 16x10 | 1 | 4 | 0.9 | |||
| 48 | 1 7/8 | 16x10 | 1 | 4 | 0.9 | |||
| 51 | 2 | 16x10 | 1 | 4 | 1.2 | |||
| 57 | 2 1/4 | 16x10 | 1 | 4 | 1.3 | |||
| 64 | 2 1/2 | 18x13 | 1 | 4 | 1.5 | |||
| Puurirull | Pikkus | Dimaeter | Kaal | |||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 2400 | 7'10'' | 32 | 1 1/4 | 15.3 | |||
| 3090 | 10'11/2'' | 32 | 1 1/4 | 19.8 | ||||
| 3400 | 11'13/4'' | 32 | 1 1/4 | 21.7 | ||||
| 4000 | 13'13/8'' | 32 | 1 1/4 | 25.5 | ||||
| 4310 | 14'11/2'' | 32 | 1 1/4 | 27.5 | ||||
| 4920 | 16'11/2'' | 32 | 1 1/4 | 31.3 | ||||
| 5530 | 18'11/2'' | 32 | 1 1/4 | 35.2 | ||||
| 3090 | 10'11/2'' | 35 | 1 3/8 | 24 | ||||
| 3700 | 12'11/2'' | 35 | 1 3/8 | 28.7 | ||||
| 4000 | 13'13/8'' | 35 | 1 3/8 | 31.1 | ||||
| 4310 | 14'11/2'' | 35 | 1 3/8 | 33.4 | ||||
| 4920 | 16'11/2'' | 35 | 1 3/8 | 37.8 | ||||
| 5530 | 18'11/2'' | 35 | 1 3/8 | 42.9 | ||||
| 6100 | 20' | 35 | 1 3/8 | 47.3 | ||||
| 3700 | 12'11/2'' | 35 | 1 3/8 | 29 | ||||
| 4310 | 14'11/2'' | 35 | 1 3/8 | 34.1 | ||||
| 4920 | 16'11/2'' | 35 | 1 3/8 | 38.8 | ||||
| 5530 | 18'11/2'' | 35 | 1 3/8 | 43.6 | ||||
| 6400 | 21' | 35 | 1 3/8 | 50.3 | ||||
| Sidumine | Pikkus | Dimaeter | Niit | Kaal | ||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 170 | 6 3/4 | 55 | 2 5/32 | R38 | 1.8 | ||
| 190 | 7 1/2 | 55 | 2 5/32 | T38 | 2 | |||
| 150 | 6 1/8 | 45 | 1 3/4 | R25-R32 | 1.1 | |||
| 160 | 6 1/4 | 45 | 1 3/4 | R25-R32 | 1.2 | |||
| 160 | 6 1/4 | 45 | 1 3/4 | R28-R32 | 1.2 | |||
| 160 | 6 1/4 | 55 | 2 5/32 | R32-R38 | 1.8 | |||
| 170 | 6 3/4 | 55 | 2 5/32 | R32-R38 | 2 | |||
| 180 | 71/16 | 55 | 2 5/32 | R32-R38 | 2.2 | |||
| 210 | 8 1/4 | 55 | 2 5/32 | R32-R38 | 2.8 | |||
| 170 | 6 3/4 | 56 | 2 1/8 | R32-T38 | 2.1 | |||
| 180 | 71/16 | 56 | 2 1/8 | R32-T38 | 2.2 | |||
| 210 | 8 1/4 | 56 | 2 1/8 | R32-T38 | 2.8 | |||
| 190 | 7 1/2 | 63 | 2 33/64 | R32-T45 | 3.2 | |||
| Pingi puurimine | ||||||||
| Puuriotsik | Bit Dia. | EI x Nupp x Dia. | Loputusauk | Kaal | ||||
| mm | tolli | Esiosa | Mõõtur | Nurk | Esiosa | Külg | (KG) | |
 | sfäärilised nupud | |||||||
| 48 | 1 7/8 | 2x9 | 5x11 | 35° | 1 | 2 | 1 | |
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 51 | 1 | 2x10 | 5x11 | 35° | 1 | 2 | 1 | |
| 51 | 2 | 3x9 | 6x10 | 35° | 3 | 1 | ||
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 57 | 2 1/4 | 3x10 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 3x11 | 6x12 | 30° | 3 | 1.6 | ||
| 64 | 2 1/2 | 3x10,1x10 | 6x11 | 35° | 3 | 1.6 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
| 70 | 3 | 4x11 | 8x11 | 40° | 2 | 2.6 | ||
| 76 | 3 | 4x11,1x11 | 8x11 | 35° | 2 | 2.6 | ||
 | Paraboolsed nupud | |||||||
| 48 | 1 7/8 | 3x8 | 6x10 | 40° | 3 | 0.9 | ||
| 51 | 2 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 54 | 2 1/8 | 3x9 | 6x10 | 40° | 3 | 1 | 1 | |
| 57 | 2 1/4 | 3x9 | 6x11 | 35° | 3 | 1.3 | ||
| 57 | 2 1/4 | 3x10 | 6x11 | 35° | 3 | 1.3 | ||
| 64 | 2 1/2 | 4x10 | 8x10 | 40° | 2 | 1.6 | ||
 | 45 | 1 3/4 | 16x10 | 1 | 4 | 0.9 | ||
| 48 | 1 7/8 | 16x10 | 1 | 4 | 0.9 | |||
| 51 | 2 | 16x10 | 1 | 4 | 1.2 | |||
| 57 | 2 1/4 | 16x10 | 1 | 4 | 1.3 | |||
| 64 | 2 1/2 | 16x10 | 1 | 4 | 1.5 | |||
| Puurirull | Pikkus | Dimaeter | Kaal | |||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 915 | 3' | 32 | 1 1/4 | 5.4 | |||
| 1000 | 3'33/8'' | 32 | 1 1/4 | 5.9 | ||||
| 1220 | 4' | 32 | 1 1/4 | 7.2 | ||||
| 1830 | 6' | 32 | 1 1/4 | 10.8 | ||||
| 2435 | 8' | 32 | 1 1/4 | 14.3 | ||||
| 3050 | 10' | 32 | 1 1/4 | 17.9 | ||||
| 3660 | 12' | 32 | 1 1/4 | 21.5 | ||||
 | 915 | 3' | 32 | 1 1/4 | 6.2 | |||
| 1000 | 4' | 32 | 1 1/4 | 8 | ||||
| 1220 | 5' | 32 | 1 1/4 | 9.8 | ||||
| 1830 | 6' | 32 | 1 1/4 | 11.6 | ||||
| 2435 | 8' | 32 | 1 1/4 | 15.1 | ||||
| 3050 | 10' | 32 | 1 1/4 | 18.7 | ||||
| 3660 | 12' | 32 | 1 1/4 | 22.3 | ||||
 | 3050 | 10' | 39 | 1 1/2 | 27 | |||
| 3660 | 12' | 39 | 1 1/2 | 32 | ||||
 | 1220 | 4' | 46 | 1 3/4 | 10 | |||
| 1525 | 5' | 46 | 1 3/4 | 12.5 | ||||
| 1830 | 6' | 46 | 1 3/4 | 14.2 | ||||
| 3050 | 10' | 46 | 1 3/4 | 25 | ||||
| Sidumine | Pikkus | Dimaeter | Kaal | |||||
| mm | tolli | mm | tolli | (KG) | ||||
 | 150 | 6 1/8 | 44 | 1 3/4 | 1 | |||
| 160 | 6 1/4 | 44 | 1 3/4 | 1.1 | ||||
Pilt
| Minimaalne tellimuse kogus | Ei kehti |
| Hind | |
| Pakendi üksikasjad | Standardne eksporditarnepakett |
| Tarne aeg | 7 päeva |
| Maksetingimused | T/T |
| Pakkumise võime | Täpsema tellimuse alusel |
